Regal Rotary Vise 
1/2The Regal Rotary series utilizes the same head and jaw set
assembly as the original Regal vises. Only now you can have the
added benefit of rotating the head of the vise 360 degrees and
220 degrees vertically. This vise is available in a C clamp (accommodate
a table up to 21/8" thick.), standard lightweight pedestal
and Medallion, a special heavy bronze pedestal.
Some of the world's best tyers use the Regal Vise extensively,
and find it to be one of the best. The jaws of the Regal are always
under tension, the handle is used to pry the jaws apart to accept
any hook you choose. A machined hook pocket in the jaws make certain
your larger hooks will not move around. The Regal Vise has a lifetime
guarantee.
Regal vises are factory authorized items. If you are a member
of 
and purchase it at list price,
you are entittled to premium dollars worth 20% of the purchase
price to use on any non-factory authorized item(s)
RCS-5 Rotary Clamp, Suggested Retail $135.00 $
108.00
RPS-6 Lightweight Pedestal, Suggested Retail $165.00
$132.00
Medallion Series RPS-7, Special Bronze Pedestal $185.00
$148.00
All Regal Rotary Vises listed above are delivered set up for right hand tying. Left hand set up available upon request.
JVS-Jw/o Jumbo Jaws 97. 77.60
RVS-H Head, stem & swivel (specify long or short stem)
$105.00 84.
RVS-MH Head, stem & swivel w/mini jaws (specify long or
short stem)105.00 84.
RVS-H w/o Head Only 97.00 77.60
RVS-MH w/o Head Only w/mini jaws 97.00 77.60
RVS-CL Clamp, long stem & swivel insert 55.00 44.
RVS-PAB Pedestal ltwt base, short stem & swivel 75.00 60.
RVS-PBB Pedestal Bronze base,short stem & swivel. 100.00
80.
RVS-SSP Short stem for pedestal 14.00 11.20
RVS-LSC Long stem for clamp 16.00 12.80
RVS-SW Swivel insert for rotary 12.00 9.60
RVS-BH Bobbin holder for Regal Vise 12.00 9.60
RVS-SPK Spike-streamside flytying accessory 9.00 7.20
Regal Inex Vise
The head and jaws of the Inex Vise is the same as on the standard
vise. The head angle is nonadjusting. Model RC-2. Suggested Retail
$95.00 $ 76.00
The Nor-Vise is made for the professional, with all the frustrations of other vises designed out. This vise is so smooth, so convenient, that nght handed or left, you forget it is there, except as an extension of your will. Even the pedestal mounting style has the user's convenience in mind. The vise can be mounted permanently on the professional's bench or even on its own storage base/case. This way, you have room to rest your elbows, maintain good posture and avoid fatigue. lf you drop your work, it lands on the table - not on the floor.
This is the standard size model recommended for most fly tyers. Very adequate for most fresh water petterns and will handle even Atiantic Salmon-size hooks. If the majorlty of your flies are smaller than size #2 this is the best choice.
Catalog No.N-SV
Suggested Retail $199.95
$160.00
Some features of the Nor-Vise -
* Better thread control. Spin the hook and guide the working thresd. The precision bell bearings reduce friction to the point where even the longest hooks can he completely wrapped from the inertia of a single twirl.
* No fatigue from holding your hands in unnatural positions.
* Dubbing on the Nor-Vise is incredible. Simply spin the vise and feed loose fur, hair, synthetics or whatever right onto your unwaxed working thresd. You can "rest the dubbing "pull out" into a perfect piece of yarn with the working thread as a core.
* Offset jaws return the hook to a perfect upright position after spinning, and will hold it there even without locking. You can add materials or do other operations without any danger of your work unwinding.
* Hub postion lock. A casual, almost automatic, movement of the hand locks or unlocks the hub for rotating.
Instructional Nor-Vise Video
Included with purchase of every Nor-Vise. Catalog No. VI-64
Suggested Retail $ 9.95
$ 8.00
Large Nor-Vise
For large petterns, especially saltwater flies, this is the best choice. It will do small ones also, but if the majority of the need is size #2 and larger, this is the best choice.
Catalog No. N-LV
Suggested Retail $219.95
$176.00
Base Case
Oak hardwood with brass hardware and a durable almond- colored working surface. Has a fitted plate inside for storing the vise, with room for tools and some materials, and includes special belts.
Small vise.
Suggested Retail $ 59.95
$ 48.00
Large vise
Suggested Retail $ 69.95
$ 55.95
Renzetti vises are factory authorized items. If you are a member
of and purchase it at list price,
you are entittled to premium dollars worth 20% of the purchase
price to use on any non-factory authorized item(s)
1/2
The
master's vise is the most advanced and versatile vise available.
It is for the all around or production tyer and is a must for
the salt water tyer. It will handle any hook from 28 to 10/0 with
only one jaw and will keep the hook shank on the rotary center
line. The jaw is infinitely adjustable to allow the tyer to hold
the hook at any part of the hook bend. The jaw lock is lever operated
and requires less than one quarter the force needed for other
lever operated vises to lock the hook tight enough to be bent.
In fact, the lever is only one inch long and is precisely limited
in its travel so the jaw cannot be unnecessarily overstressed.
The master's vise also has the traditional rotary actuator which
allows the tyer to rotate the jaws by spinning the rotary arrn.
The arm can be reversed for left hand tying and/or locked in position
to rotate in both directions. The rotary tension unit allows the
tyer to adjust the drag on the rotary shaft from free spinning
to a locked position at any angle desired. The ball bearing head
gives precision alignment and very smooth rotary motion to the
shaft.
STANDARD FEATURES
With Salt Water CClamp M6002 590.
With Salt Water Pedestal Base M6004 590.
The traveler series is our basic true
rotary vise line. It will handle all hooks from 28 to 4/0 with
exceptional gripping power. The traveler is ideal for taking on
trips or to the stream-the perfect traveling vise since the CClamp
model only weighs 8 ounces. The beginner as well as the experienced
tyer will find this vise highly functional and of excellent quality.
STANDARD FEATURES
With CClamp T2002 124.95
With Pedestal Base T2003 129.95
This rotary tube fly vise is very easy to use, will handle tubes up to 4 inches long, and comes with a standard 1/16 inch diameter mandrel. Other mandrels will be available. The vise also has a rotary locking knob conveniently placed and yet out of the way.
The Renzetti tube fly vise comes in three models. The T1001 will fit all Traveler vise stems!
Vise Head Only T1001 35.
Vise With CClamp T1002 60.
Vise With Pedestal Base T1003 65.
and purchase it at list price,
you are entittled to premium dollars worth 20% of the purchase
price to use on any non-factory authorized item(s).FTM AD AAA Black Vise
Excellent quality. Beautifully chrome plated and polished. Perfectly matched jaws make the vise a bargain for beginner and expert alike.
Catalog No. FTM-5003
Retail $ 15.80
$ 12.60
FTM Super AA Vise
Excellent quality. Beautifully chrome plated and polished. Perfectly matched jaws make the vise a bargain for beginner and expert alike.
Catalog No. FTM-5007
Retail $ 13.15
$ 10.50
Standard Replacement Jaws
Catalog No. FTM 5018-1
Retail $ 5.85
$ 4.65
FTM Mega Vise
Full 360 degree rotation, black finish.
Catalog No. FTM-5O21
Retail $ 28.05
$ 22.40
FTM Supreme Vise
This Vise allows full 360 degree rotation for inspectlon of the fly from every angle. The angle of the jaws can also be adjusted to fine tune the vise for your tying needs. Black no-glare finish with brass fittings. Tapered jaws handle a full range of hooks. Ideal for the intermediate or advanced tyer.
Catalog No. FTM-6002
Retail $ 27.55
$ 22.00
FTM Master Vise
Jaws can be rotated 360 degrees to inspect your fly from all angles. Comes with two sets of jaws: standard and fine tapered. Black no-glare finish with brass fittings.
Catalog No. FTM 5002
Retail $ 31.45
$ 25.15
FTM Practical Vise
This vise features a black no-glare finish, metal knobs and jaws that can be used to tie midge flies to size 28.
Catalog No. FTM-6009
Retail $ 7.90
$ 6.30
FTM Onida Vise
Full 360 degree rotation and angle adjustment lock. Elegant brass fittings.
Catalog No. FTM4026
Retail $ 33.45
$ 26.75
FTM MG Vise
This vise is easy to operate, strong, and has fine tapered jaws. Perfect for fly tying classes and kits.
Catalog No. FTM-5O23
Retail $ 19.40
$ 15.50
FTM Kit Vise
A great vise for fly tying classes, kits and for beginners.
Catalog No. FTM4024
Suggested Retail $ 10.60
$ 8.50
FTM Magnum Vise
Portable heavy pedestal base vise with new angle attachment which allows you to use the vise vertically or in the normal standing position. No-glare back finish. Comes with three sets of jaws standard, midge, and heavy.
Catalog No. FTM-6010
Retail $ 30.60
$ 24.50
Midge Jaws Catalog No. FTM4417-1
Salmon Jaws Catalog No. FTMJ417-2
Retail Price $ 3.97
$ 3.15
Magnum Deluxe Conversion Base
Heavy duty plate base can be used with any standard FTM vise or any vise with a 3/8" stem. Corkline padding prevents slipping and also protects table surface. Comes with angle attachments which give you the option of holding your vise in two different ways.
Catalog No. FTM 6011
Retail $ 17.25
$ 13.80
Griffin Superior 1A Vise
Features a fixed head and a solid 3/8" shaft with a formed C camp. This vise is ideal for kits and for the beginner fly tyer. One year warranty. Made in the USA.
Catalog No. Vl-1A
Retail $ 29.95
$ 23.95
Griffin Superior 2A Vise
The Superior 2A vise has a front or rear tension mode and can easily be converted for right or left hand tyers. Jaws are constructed of heat treated quality steel which give you positive control of pressure to the hook, eliminating hook breakage. The jaws may be set at any angle desired and feature easy and positive adjustment to hook sizes that range from 22 to 6/0. The C-clamp is cast aluminum and provides for positive gripping. Easy to follow instrustions included. Made in the USA. Life-time guarantee.
Catalog No. VI-2A
Retail S 47.50
$ 38.00
Griffin Superior 3AR Clamp Vise
This c-clamp vise has a 360 degree rotating feature and can be converted for right or left hand tyers. Those vises have Griffin's 2A jaws which are easily adjusted to hook sizes 22 to 6/ 0, can be set at any angle desired, and provide positive control of pressure to hooks with a front or rear tension mode which eliminates hook breakage. The C-clamp is cast aluminum and provides positive gripping. The 3/8" stem breaks down for travel and all vises come with easy-to-follow instructions. Made in the USA, lifetime guarantee.
Catalog No. Vl JAR
Retail $ 75.00
$ 60.00
Griffin Superior 3ARP Pedestal Vise
This vise has all the features of the 3AR with an added feature of being a pedestal model. Because of the unique feature of the 3/8" stem breaking down it allow it to be converted back to a C-clamp model (a C-clamp is included). Also it allows a tyer to have the ability of mounting a collet-all to the table without having to purchase an adaptor.
Catalog No. Vl-3ARP
Retail $ 90.00
$ 72.00
Griffin Pedestal
May be used on any vise with a 3/8" stem. It is constructed of heavy steel weighing approximately 3 Ibs., and has a rubber pad on the bottom.
Catalog No. PB
Retail $ 19.95
$ 15.95
Griffin Rotator for 3AR & 3ARP Vises
This delrin rotator is a standard feature of the Patriot Cam vise and is now available for the 3AR and 3ARP vises.
Catalog No. RH
Retail $ 9.95
$ 7.95
Griffin Patriot Cam Vise
Features are: total hook pressure control to compensate a wide range of hook sizes, extremely easy to close due to the smooth section of a delrin cam, 360 degree rotation, jaws can be used at any angle, comes with a C-clamp and pedestal. Lifetime guarantee. Made in the U.S.A.
Catalog No. VI-P
Retail $ 135.00
$ 108.00
Griffin Non-Rotating Patriot Cam Vise
This newest model is a non-rotating version of the Patriot Cam vise. It comes with a C-clamp instead of a pedestal. Proudly made int he USA. Lifetime guarantee.
Catalog No. VI-PN
Retail $ 84.95
$ 67.95
Interchangeable jaws-you will not believe how easy it is to change jaws on these vises. An allen wrench and complete instructions are included with each set.
Midge Jaws(size 22 & 24 Hooks) Catalog No. JA-TA
Bullnose Jaws(bass, pike & saltwater flies) Catalog No. JA-BU
Retail $ 29.95
$ 23.95
D.H. Thompson Vises
D. H. Thompson created modern fly tying wlth the
invention of the "collet" type vises. These cam-operated
vises have special steel collets with tapered necks which are
drawn into compatible tapered throats of hardened steel to close
the jaws. The single action of the cam lever is enough to grasp
or release the hook. Thompson vises are made in USA and have a
lifetime guarantee.
"A" Vise
A deluxe vise, ajustable to height and position. Here is the vise that ushered in the modern era of flytying with its cam-operated collet mechanism. It has been setting the standard for flytying vises for over 60 years. The "A" clamps on any table or bench, is height adjustable, and will accept all Thompson interchangeable jaws.
Catalog No. VI-A
Retail $ 48.00
$ 38.40
Pro II
This is the ultimate vise for all fly tyers. Completely portable, with no-glare finish, the Pro II goes anywhere. The weighted base eliminates the need for table-edge clamps, and you can tie flies anywhere. The ultimate in convenience and precision.
Catalog No. VI-PRII
Retail $ 59.95
$ 47.95
Conversion Base
This finely-finished heavy steel base quickly converts your clamp-type vise into a pedestal model. Fits Thompson Pro, Ultra, and "A" vises. Certain models manufactured by other companies with a 3/8" shank will also fit this base.
Catalog No. VI-PR
Retail $ 34.99
$ 28.
360 SLT Vises
This vise offers the ultimate in convenience, precision and value. Features include: Full 360 degree rotation, positive control in any position. no detaining pins, levers or sctews to loosen jaws. It incorporates two fully adjustable, pressure-sensitive Delrin washers to facilitate smooth, effortless rotation. Just make the initial adjustments, insert the fook, tie and rotate. Available with C-clamp or base.
Clamp Model
Catalog No. VI-360CLAMP
Retail $ 150.00
$ 120.
Base Model
Catalog No. VI-360BASE
Retail $ 200.00
$ 160.
Jaws & Replacement Parts
The midge jaws were designed for use with size 18 to 32 hooks. Collet comes with a change-screw, replacing the rivet, for interchangeable use with the "A" or Pro vise.
The super jaws are for the bass or salhtwater tyer who uses 4/0, 5/0, & 6/0 hooks. Fits the Pro II, Pro 360, and A vises.
Catalog No. Description Retail
MIJA Midge jaws $ 13.50 $10.80
Vl.IA Standard Jaws $ 13.50 $10.80
SWA Super jaws $ 13.50 $10.80
CLTH Clamp Vise Thumbscrew $ 1.55 $1.25
